Polished Concrete Surf Coast
A considered concrete finish for spaces that open to the coast. Slab Studio travels from Geelong to Surf Coast projects, working directly with homeowners and their project teams.
Resolve indoors and outdoors together.
For a home with an alfresco area or an open threshold, begin by identifying which surfaces are enclosed, exposed to weather or likely to become wet. An interior polished floor and an exterior concrete finish need separate consideration even where the colour and aggregate are intended to relate.
Mechanical polished concrete is our primary interior offering. Pavilion, our ground and acid-etched finish, is the only exterior option. The photographs on this page show our Highton work in Geelong as a finish reference; they are not labelled as a Surf Coast case study.
A specification for the way the space is used.
Discuss shoes, tracked-in sand, water, cleaning and exposure with your designer and Irwin. A reflective appearance does not establish a slip rating or make a floor suitable for every wet area. Surface selection and any required testing should follow the actual use.
Read our guide to polished concrete and slip resistance before choosing a finish from a photograph alone.
Planning, before polishing.
For a new slab, involve the polishing specialist before the pour so appearance, joints, transitions and protection can be coordinated with the builder. For an existing floor, begin with its condition and any known coverings or repairs.
Access and timing matter too. Send the site location and programme with your plans, particularly where other trades or a staged handover need to be accommodated. Use our pre-pour planning guide.
From the first call to the finished floor.
You work directly with Irwin. We discuss Nil / Surface Polish, Random Exposure or Full Exposure against the concrete available, and consider gloss separately. A manual quote follows a clear conversation about your project and the scope.
Explore our selected work across Geelong and the Bellarine for examples of the finishes, then tell us about your Surf Coast site.
Questions,
considered.
What determines a Surf Coast polished concrete quote?
The floor area, slab condition, exposure, gloss, edges and site access determine the scope. Irwin prepares each quote after discussing the specific Surf Coast project.
How far ahead should I discuss the polishing programme?
Contact us during design or before the pour for a new build. Renovation dates depend on access to the slab and preparation. We agree timing rather than assuming every floor takes the same number of days.
Do you assess both new and existing Surf Coast slabs?
Yes. New concrete needs an early finish brief and protection plan. Existing concrete needs a review of coverings, repairs, joints and the appearance the slab can support.
Are gloss levels the same for inside and outside?
Low gloss, Semi gloss and High gloss describe our interior polished concrete options. Outside, Pavilion is our only finish: ground and acid-etched concrete with a separate texture and use specification.
How do I care for a floor near outdoor living areas?
Limit tracked-in grit, remove sand regularly and clean spills promptly. Follow the care instructions for the chosen surface, with interior polished concrete and exterior Pavilion considered separately.
Does your service area include Torquay?
Yes. Torquay and the Surf Coast are served from our Geelong base. We also work across the Bellarine Peninsula; share your actual site location when enquiring.
Material, in context.
Highton Pavilion
View projectA floor that belongs
in your space.
Share your location, plans and the finish you have in mind.
Irwin will discuss the project before preparing your quote.